N824 User Manual
23
Note: *4 is the default setting, it can be changed under Feature
Codes→ General → Call Pickup.
Setup the max cull duration for every call of this extension, but
it’s only valid for outbound calls. Enter ―0‖ or leave this blank
empty, the value would be equal to the max call duration
configured in the Option Settings page.
Note: this setting will not be valid for internal calls.
3) Advanced Settings
Table 6-3 FXS Extension Configuration- Advanced Settings
Check this option if the extension should have Call Waiting
capability. If this option is checked, the ―When busy‖ follow me
options will not be available. The call waiting function of IP
phone has higher priority than N824’s call waiting function.
Don’t Disturb. When DND is enabled for an extension, the
extension will not be available.
If a dialed extension or a desired line is busy, with this feature,
when the extension or line becomes idle, your telephone will ring
automatically, so you can pick up to speak with the extension or
seize the line and dial an external number.
Check this option if you want to customize the ring time. Ring
tone will stop over the time defined.
Call forwarding for an extension can be configured here. The
administrator can configure Follow Me option for this extension.
If you want to transfer the call to an outbound number, please
follow the dial pattern of outbound route filled in the outbound
number.
For example: transferring to your mobile phone number
123456789, the dial pattern of outbound route is ―9.‖, you should
fill in 9123456789 here.
Rxgain
The Volume sent to FXS extension.
Txgain
The Volume sent out by the FXS extension.
Normally, you choose the ―default‖ option except for using N824
in Japan, in which case you should choose ―Japan‖.
There are 4 spy modes available:
General spy
You have the permission to use the following 3 modes.
Normal spy
You can only hear the call, but can't talk
Whisper spy
To Next Page
Loading...
Need help?
General
