<5. Functions of CQ1 Software> 5-13
IM 80J01A01-01E
(3) Description
Fill in the outline of measurement data.
Input contents can be confirm in (9) Pen Button of 5.5.1 Protocol
Window or 5.6.7 Information Window (For details, please refer to
each section).
Folder to store calibration data
Folder to store acquired OME-TIFF image
Folder to store projection result (if Z > 1)
Folder to store analysis result
Folder to be created by each analysis
MeasurementResult.ome.tif
Folder for each measurement data
(Folder name is set at “Save Folder Name”
Folder to store FCS format data
Folder to store ICE format data
Folder to store image data
Measurement result file
(OME-TIFF)
Designated in “Save Setting”
Over 39 letters can’t be input for “Save Folder Name”.
Please utilize following “Description” as memo for
To Next Page
Loading...
