<2. Precautions for Use/Installation> 2-5
IM 80J01A01-01E
Level location
When installing this equipment, make sure the equipment does
not tilt.
Location of minimal soot, steam, dust, corrosive gases and so on.
Location where electric power supply system of more than
AC100V, 14A (1,400W) is available.
1
Subjecting the equipment to a sudden temperature shift may cause condensation.
Installation Environment
Operating Temperature Range
CQ1: 15 – 35
Gas Mixer: 20 – 35
Operating Humidity Range
CQ1: 20 – 70 % RH, non-condensing
Gas Mixer: 10 – 85 % RH, non-condensing
To Next Page
Loading...
Need help?
General
