Command Function Page
:HISTory[:CURRent][:SEARch]:
SELect<x>:WINDow
Sets the source window of the history search or queries the current setting. 5-110
:HISTory[:CURRent]:TIME?
Queries the time of the source record number of the history waveform. 5-110
:HISTory:REFerence<x>?
Queries all settings related to the history function of the reference. 5-110
:HISTory:REFerence<x>:DMODe
(Display Mode)
Sets the display mode of the history waveform of the reference or queries
the current setting.
5-110
:HISTory:REFerence<x>:MODE
Sets the highlight display mode of the history waveform of the reference or
queries the current setting.
5-110
:HISTory:REFerence<x>:RECord
Sets the source record of the history waveform of the reference or queries
the current setting.
5-110
:HISTory:REFerence<x>:RECord?
MINimum
Queries the minimum record number of the history waveform of the
reference.
5-110
:HISTory:REFerence<x>:REPLay?
Queries all settings related to the replay function of the history function of the
reference.
5-110
:HISTory:REFerence<x>:REPLay:
JUMP
Jumps to the specified record number of the history waveform of the
reference.
5-111
:HISTory:REFerence<x>:REPLay:
SPEed
Sets the replay speed of the history waveform of the reference or queries the
current setting.
5-111
:HISTory:REFerence<x>:REPLay:
STARt
Starts the replay of the history waveform of the reference. 5-111
:HISTory:REFerence<x>:REPLay:
STOP
Stops the replay of the history waveform of the reference. 5-111
:HISTory:REFerence<x>:TIME?
Queries the time of the source record number of the reference waveform. 5-111
IMAGe Group
:IMAGe?
Queries all settings related to the output of screen image data. 5-112
:IMAGe:FORMat
Sets the output format of the screen image data or queries the current
setting.
5-112
:IMAGe:SEND?
Queries the screen image data. 5-112
:IMAGe:TONE
Sets the tone of the screen image data or queries the current setting. 5-112
INITialize Group
:INITialize:EXECute
Execute the initialization. 5-113
:INITialize:UNDO
Cancels the initialization that was executed. 5-113
MATH Group
:MATH<x>?
Queries all settings related to the computation. 5-114
:MATH<x>:DISPlay
Turns ON/OFF the computed waveform or queries the current setting. 5-114
:MATH<x>:ECOunt?
Queries all settings related to the edge count computation. 5-114
:MATH<x>:ECOunt:HYSTeresis
Sets the hysteresis of the edge detection level of the edge count computation
or queries the current setting.
5-114
:MATH<x>:ECOunt:POLarity
Sets the edge detection polarity of the edge count computation or queries
the current setting.
5-114
:MATH<x>:FILTer?
Queries all settings related to the filter. 5-114
:MATH<x>:FILTer:DELay?
Queries all settings related to the delay computation. 5-114
:MATH<x>:FILTer:DELay:TIME
Sets the delay value of the delay computation or queries the current setting. 5-114
:MATH<x>:FILTer:IIR?
Queries all settings related to the IIR filter computation. 5-115
:MATH<x>:FILTer:IIR:FORDer
(Filter Order)
Sets the filter order of the IIR filter computation or queries the current setting. 5-115
:MATH<x>:FILTer:IIR:HIPass?
Queries all settings related to the IIR high pass filter computation. 5-115
:MATH<x>:FILTer:IIR:HIPass:COFF
Sets the cutoff frequency of the IIR high pass filter computation or queries
the current setting.
5-115
:MATH<x>:FILTer:IIR:LOWPass?
Queries all settings related to the IIR low pass filter computation. 5-115
:MATH<x>:FILTer:IIR:LOWPass:
COFF
Sets the cutoff frequency of the IIR low pass filter computation or queries the
current setting.
5-115
:MATH<x>:FILTer:MAVG?
Queries all settings related to the moving average computation. 5-115
:MATH<x>:FILTer:MAVG:WEIGht
Sets the weight of the moving average computation or queries the current
setting.
5-115
:MATH<x>:FILTer:RESCaling?
Queries all settings related to the rescaling of the filter. 5-115
:MATH<x>:FILTer:RESCaling:
AVALue
Sets rescaling coefficient A of the filter or queries the current setting. 5-115
5.1 List of Commands
To Next Page
Loading...
Need help?
General
