5-17
IM 701310-17E
Commands
Command Function Page
:MATH<x>:FILTer:RESCaling:
BVALue
Sets rescaling offset B of the filter or queries the current setting. 5-116
:MATH<x>:FILTer:TYPE
Sets the filter type or queries the current setting. 5-116
:MATH<x>:INTegral?
Queries all settings related to the integral computation. 5-116
:MATH<x>:INTegral:PSCaling?
Queries all settings related to the pre-scaling of the integral computation. 5-116
:MATH<x>:INTegral:PSCaling:
AVALue
Sets pre-scaling coefficient A of the integral computation or queries the
current setting.
5-116
:MATH<x>:INTegral:PSCaling:
BVALue
Sets pre-scaling offset B of the integral computation or queries the current
setting.
5-116
:MATH<x>:INTegral:RESCaling?
Queries all settings related to the rescaling of the integral computation. 5-116
:MATH<x>:INTegral:RESCaling:
AVALue
Sets rescaling coefficient A of the integral computation or queries the current
setting.
5-116
:MATH<x>:INTegral:RESCaling:
BVALue
Sets rescaling offset B of the integral computation or queries the current
setting.
5-116
:MATH<x>:INVert
Turns ON/OFF the inverted display of the computed waveform or queries the
current setting.
5-116
:MATH<x>:IPOint? (Initial Point)
Queries all settings related to the computation reference point. 5-117
:MATH<x>:IPOint:JUMP
Moves the computation reference point to the specified position. 5-117
:MATH<x>:IPOint:POSition
Sets the computation reference point or queries the current setting. 5-117
:MATH<x>:LABel?
Queries all settings related to the label of the computed waveform. 5-117
:MATH<x>:LABel[:DEFine]
Sets the label of the computed waveform or queries the current setting. 5-117
:MATH<x>:LABel:MODE
Turns ON/OFF the label display of the computed waveform or queries the
current setting.
5-117
:MATH<x>:MINus?
Queries all settings related to the subtraction. 5-117
:MATH<x>:MINus:PSCaling<x>?
Queries all settings related to the pre-scaling of the subtraction. 5-117
:MATH<x>:MINus:PSCaling<x>:
AVALue
Sets pre-scaling coefficient A of the subtraction or queries the current setting. 5-117
:MATH<x>:MINus:PSCaling<x>:
BVALue
Sets pre-scaling offset B of the subtraction or queries the current setting. 5-117
:MATH<x>:MINus:RESCaling?
Queries all settings related to the rescaling of the subtraction. 5-118
:MATH<x>:MINus:RESCaling:AVALue
Sets rescaling coefficient A of the subtraction or queries the current setting. 5-118
:MATH<x>:MINus:RESCaling:BVALue
Sets rescaling offset B of the subtraction or queries the current setting. 5-118
:MATH<x>:MULTiple?
Queries all settings related to the multiplication. 5-118
:MATH<x>:MULTiple:PSCaling<x>?
Queries all settings related to the pre-scaling of the multiplication. 5-118
:MATH<x>:MULTiple:PSCaling<x>:
AVALue
Sets pre-scaling coefficient A of the multiplication or queries the current
setting.
5-118
:MATH<x>:MULTiple:PSCaling<x>:
BVALue
Sets pre-scaling offset B of the multiplication or queries the current setting. 5-118
:MATH<x>:MULTiple:RESCaling?
Queries all settings related to the rescaling of the multiplication. 5-118
:MATH<x>:MULTiple:RESCaling:
AVALue
Sets rescaling coefficient A of the multiplication or queries the current setting. 5-118
:MATH<x>:MULTiple:RESCaling:
BVALue
Sets rescaling offset B of the multiplication or queries the current setting. 5-119
:MATH<x>:OPERation
Sets the operator or queries the current setting. 5-119
:MATH<x>:PLUS?
Queries all settings related to the addition. 5-119
:MATH<x>:PLUS:PSCaling<x>?
Queries all settings related to the pre-scaling of the addition. 5-119
:MATH<x>:PLUS:PSCaling<x>:
AVALue
Sets pre-scaling coefficient A of the addition or queries the current setting. 5-119
:MATH<x>:PLUS:PSCaling<x>:
BVALue
Sets pre-scaling offset B of the addition or queries the current setting. 5-119
:MATH<x>:PLUS:RESCaling?
Queries all settings related to the rescaling of the addition. 5-119
:MATH<x>:PLUS:RESCaling:AVALue
Sets rescaling coefficient A of the addition or queries the current setting. 5-119
:MATH<x>:PLUS:RESCaling:BVALue
Sets rescaling offset B of the addition or queries the current setting. 5-119
:MATH<x>:POSition
Sets the vertical position of the computed waveform or queries the current
setting.
5-120
:MATH<x>:SCALe?
Queries all settings related to scaling. 5-120
:MATH<x>:SCALe:CENTer
Sets the offset of the computed waveform or queries the current setting. 5-120
:MATH<x>:SCALe:MODE
Sets the scaling mode or queries the current setting. 5-120
:MATH<x>:SCALe:SENSitivity
Sets the vertical sensitivity of the computed waveform or queries the current
setting.
5-120
:MATH<x>:SELect
Sets the display option or queries the current setting. 5-120
:MATH<x>:SVALue (Scale VALUE)
Turns ON/OFF the scale value display or queries the current setting. 5-120
5.1 List of Commands
To Next Page
Loading...
Need help?
General
