Command Function Page
:MATH<x>:THReshold<x>
Sets the edge detection level of the count computation or queries the current
setting.
5-120
:MATH<x>:UNIT?
Queries all settings related to the computation unit. 5-120
:MATH<x>:UNIT[:DEFine]
Sets the computation unit or queries the current setting. 5-120
:MATH<x>:UNIT:MODE
Sets the automatic/manual addition of the computation unit or queries the
current setting.
5-121
:MATH<x>:USERdefine?
Queries all settings related to user-defined math or queries the current
setting.
5-121
:MATH<x>:USERdefine:ARANging
Executes auto ranging for user-defined math. 5-121
:MATH<x>:USERdefine:CONStant<x>
Sets a user-defined math constant or queries the current setting. 5-121
:MATH<x>:USERdefine:DEFine
Sets a user-defined math equation or queries the current setting. 5-121
:MATH<x>:USERdefine:HISTory:
ABORt
Cancels history computation for user-defined math. 5-121
:MATH<x>:USERdefine:HISTory:
EXECute
Executes history computation for user-defined math. 5-121
MEASure Group
:MEASure?
Queries all settings related to the automated measurement of waveform
parameters.
5-122
:MEASure:CALCulation?
Queries all settings related to calculation items. 5-122
:MEASure:CALCulation:ALL
Turns ON/OFF all calculation items. 5-122
:MEASure:CALCulation:COUNt<x>?
Queries the statistical processing count of the calculation item. 5-122
:MEASure:CALCulation:DEFine<x>
Sets the equation of the calculation item or queries the current setting. 5-122
:MEASure:CALCulation:{MAXimum<x
>|MEAN<x>|MINimum<x>|SDEViation
<x>}?
Queries the statistical value of the calculation item. 5-122
:MEASure:CALCulation:STATe<x>
Turns ON/OFF the calculation item or queries the current setting. 5-122
:MEASure:CALCulation:VALue<x>?
Queries the automated measured value of the calculation item. 5-123
:MEASure:CONTinuous?
Queries all settings related to the continuous statistical processing. 5-123
:MEASure:CONTinuous:COUNt
Sets the continuous statistical processing count or queries the current
setting.
5-123
:MEASure:CONTinuous:RESTart
Restarts the continuous statistical processing. 5-123
:MEASure:CYCLe?
Queries all settings related to the cycle statistical processing. 5-123
:MEASure:CYCLe:ABORt
Aborts the execution of the cycle statistical processing. 5-123
:MEASure:CYCLe:EXECute
Executes the cycle statistical processing. This is an overlap command. 5-123
:MEASure:CYCLe:TRACe
Sets the cycle source trace of the continuous statistical processing count or
queries the current setting.
5-123
:MEASure:DISPlay
Turns ON/OFF the display of the automated measurement of waveform
parameters or queries the current setting.
5-123
:MEASure:HISTory:ABORt
Aborts the execution of the statistical processing of the history data. 5-123
:MEASure:HISTory:EXECute
Executes the statistical processing of the history data. This is an overlap
command.
5-123
:MEASure:MODE
Sets the mode of the automated measurement of waveform parameters or
queries the current setting.
5-123
:MEASure:THReshold?
Queries all settings related to the threshold levels of the automated
measurement of waveform parameters.
5-124
:MEASure:THReshold:TRACe<x>?
Queries the threshold levels of the trace. 5-124
:MEASure:THReshold:TRACe<x>:
AUTO
Sets the detection mode when the auto setting of the threshold level is
enabled or queries the current setting.
5-124
:MEASure:THReshold:TRACe<x>:
LHYSteresis?
Queries all settings related to the level and hysteresis of the threshold level. 5-124
:MEASure:THReshold:TRACe<x>:
LHYSteresis:HYSTeresis
Sets the hysteresis of the threshold level or queries the current setting. 5-124
:MEASure:THReshold:TRACe<x>:
LHYSteresis:LEVel
Sets the level of the threshold level or queries the current setting. 5-125
:MEASure:THReshold:TRACe<x>:
MODE
Sets the setup mode of the threshold level or queries the current setting. 5-125
:MEASure:THReshold:TRACe<x>:
ULOWer?
Queries all settings related to the upper and lower limits of the threshold
level.
5-125
:MEASure:THReshold:TRACe<x>:
ULOWer:RANGe
Sets the upper and lower limits of the threshold level or queries the current
setting.
5-125
:MEASure:TRACe<x>?
Queries all settings related to the trace. 5-126
:MEASure:TRACe<x>:AREA<x>?
Queries all settings related to the area. 5-126
5.1 List of Commands
To Next Page
Loading...
