Command Function Page
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>?
Queries all settings related to each ID of the OR condition of the CAN bus
signal trigger.
5-179
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:ACK
Sets each ACK condition of the OR condition of the CAN bus signal trigger
or queries the current setting.
5-180
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA?
Queries all settings related to each data of the OR condition of the CAN bus
signal trigger.
5-180
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:BORDer
Sets byte order of each data of the OR condition of the CAN bus signal
trigger or queries the current setting.
5-180
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:CONDition
Sets each data condition of the OR condition of the CAN bus signal trigger or
queries the current setting.
5-180
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:DATA<x>
Sets comparison data of each data of the OR condition of the CAN bus
signal trigger or queries the current setting.
5-180
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:DLC
Sets the number of valid bytes (DLC) of each data of the OR condition of the
CAN bus signal trigger or queries the current setting.
5-181
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:HEXA
Sets each data of the OR condition of the CAN bus signal trigger in
hexadecimal notation.
5-181
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:MSBLsb
Sets the MSB and LSB bits of each data of the OR condition of the CAN bus
signal trigger or queries the current setting.
5-181
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:PATTern
Sets each data of the OR condition of the CAN bus signal trigger in binary
notation or queries the current setting.
5-181
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:DATA:SIGN
Sets sign of each data of the OR condition of the CAN bus signal trigger or
queries the current setting.
5-181
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:FORMat
Sets each message format (standard or extended) of the OR condition of the
CAN bus signal trigger or queries the current setting.
5-181
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:IDEXt?
Queries all settings related to the ID of each extended format of the OR
condition of the CAN bus signal trigger.
5-182
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:IDEXt:HEXA
Sets the ID of each extended format of the OR condition of the CAN bus
signal trigger in hexadecimal notation.
5-182
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:IDEXt:PATTern
Sets the ID of each extended format of the OR condition of the CAN bus
signal trigger in binary notation or queries the current setting.
5-182
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:IDSTd?
Queries all settings related to the ID of each standard format of the OR
condition of the CAN bus signal trigger.
5-182
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:IDSTd:HEXA
Sets the ID of each standard format of the OR condition of the CAN bus
signal trigger in hexadecimal notation.
5-182
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:IDSTd:PATTern
Sets the ID of each standard format of the OR condition of the CAN bus
signal trigger in binary notation or queries the current setting.
5-182
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:MODE
Enables or disables each condition of the OR condition of the CAN bus
signal trigger or queries the current setting.
5-183
:TRIGger:ENHanced:CANBus:IDOR:
ID<x>:RTR
Sets each RTR of the OR condition of the CAN bus signal trigger or queries
the current setting.
5-183
:TRIGger:ENHanced:CANBus:IDSTd?
Queries all settings related to the ID of the standard format of the CAN bus
signal trigger.
5-183
:TRIGger:ENHanced:CANBus:IDSTd:
HEXA
Sets the ID of the standard format of the CAN bus signal trigger in
hexadecimal notation.
5-183
:TRIGger:ENHanced:CANBus:IDSTd:
PATTern
Sets the ID of the standard format of the CAN bus signal trigger in binary
notation or queries the current setting.
5-183
:TRIGger:ENHanced:CANBus:MODE
Sets the CAN bus signal trigger mode or queries the current setting. 5-183
:TRIGger:ENHanced:CANBus:
RECessive
Sets the recessive level (bus level) of the CAN bus signal trigger or queries
the current setting.
5-183
:TRIGger:ENHanced:CANBus:RTR
Sets the RTR of the CAN bus signal trigger or queries the current setting. 5-183
:TRIGger:ENHanced:CANBus:SOURce
Sets the trigger source of the CAN bus signal trigger or queries the current
setting.
5-184
:TRIGger:ENHanced:CANBus:SPOint
Sets the sample point of the CAN bus signal trigger or queries the current
setting.
5-184
:TRIGger:ENHanced:I2CBus?
Queries all settings related to the I
2
C bus trigger. 5-184
:TRIGger:ENHanced:I2CBus:ADATa?
Queries all settings related to the address of the I
2
C bus trigger. 5-184
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address?
Queries all settings related to the 10-bit address of the I
2
C bus trigger. 5-184
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address:HEXA
Sets the 10-bit address of the I
2
C bus trigger in hexadecimal notation. 5-184
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address:PATTern
Sets the 10-bit address of the I
2
C bus trigger in binary notation or queries the
current setting.
5-184
:TRIGger:ENHanced:I2CBus:ADATa:
BIT7ADdress?
Queries all settings related to the 7-bit address of the I
2
C bus trigger. 5-185
5.1 List of Commands
To Next Page
Loading...
