YOKOGAWA DLM4038 User Manual

5-91
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:CURSor[:TY]:MARKer:M<x>:DV<y>:VAL
ue?
Function Queries the vertical value between marker
cursors.
Syntax
:CURSor[:TY]:MARKer:M<x>:DV<y>:VAL
ue?
<x> = 1 to 4
<y> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:DV1:VALUE?
-> :CURSOR:TY:MARKER:M1:DV1:VALUE 50
0.00000E−03
Description If
:CHANnel<x>:LSCale:MODE
is set to ON,
the scaled value will be queried.
:CURSor[:TY]:MARKer:M<x>:JUMP
Function Makes a marker cursor in the T-Y display jump to
the specified zoom waveform.
Syntax
:CURSor[:TY]:MARKer:M<x>:JUMP {Z1|Z2
}
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:JUMP Z1
Description Jumps to the center of the zoom waveform.
:CURSor[:TY]:MARKer:M<x>:POSition
Function Sets or queries the time value of a marker cursor.
Syntax
:CURSor[:TY]:MARKer:M<x>:POSition {<
NRf>}
:CURSor[:TY]:MARKer:M<x>:POSition?
<x> = 1 to 4
<NRf> = −5 to 5 (in steps of 10 divisions/display
record length)
Example
 :CURSOR:TY:MARKER:M1:POSITION−1
:CURSOR:TY:MARKER:M1:POSITION?
-> :CURSOR:TY:MARKER:M1:POSITIO
N−1.0000000
:CURSor[:TY]:MARKer:M<x>:T?
Function Queries all time axis settings for a marker cursor.
Syntax
:CURSor[:TY]:MARKer:M<x>:T?
<x> = 1 to 4
:CURSor[:TY]:MARKer:M<x>:T:STATe
Function Sets or queries the on/off status of the time value
of a marker cursor.
Syntax
:CURSor[:TY]:MARKer:M<x>:T:STA
Te {<Boolean>}
:CURSor[:TY]:MARKer:M<x>:T:STATe?
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:T:STATE ON
:CURSOR:TY:MARKER:M1:T:STATE?
-> :CURSOR:TY:MARKER:M1:T:STATE 1
:CURSor[:TY]:MARKer:M<x>:T:VALue?
Function Queries the time value of a marker cursor.
Syntax
:CURSor[:TY]:MARKer:M<x>:T:VALue?
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:T:VALUE?
-> :CURSOR:TY:MARKER:M1:T:
VALUE−4.5000E−03
:CURSor[:TY]:MARKer:M<x>:ALL
Function Collectively turns on or off the measured values
of the marker cursor on the T-Y display.
Syntax
:CURSor:TY:MARKer:M<x>:ALL {<Boolean
>}
Example
:CURSOR:TY:MARKER:M11:ALL ON
:CURSor[:TY]:MARKer:M<x>:DT<y>?
Function Queries all of the settings related to time
measurement between marker cursors.
Syntax
:CURSor[:TY]:MARKer:M<x>:DT<y>?
<x> = 1 to 4
<y> = 1 to 4
:CURSor[:TY]:MARKer:M<x>:DT<y>:STATe
Function Sets or queries the on/off status of the time value
measured between marker cursors.
Syntax
:CURSor[:TY]:MARKer:M<x>:DT<y>:STA
Te {<Boolean>}
:CURSor[:TY]:MARKer:M<x>:DT<y>:STA
Te?
<x> = 1 to 4
<y> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:DT1:STATE ON
:CURSOR:TY:MARKER:M1:DT1:STATE?
-> :CURSOR:TY:MARKER:M1:DT1:STATE 1
:CURSor[:TY]:MARKer:M<x>:DT<y>:VAL
ue?
Function Queries the time value between marker cursors.
Syntax
:CURSor[:TY]:MARKer:M<x>:DT<y>:VAL
ue?
<x> = 1 to 4
<y> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:DT1:VALUE?
-> :CURSOR:TY:MARKER:M1:DT1:VALUE 0.
0000000E+00
:CURSor[:TY]:MARKer:M<x>:DV<y>?
Function Queries all of the settings related to vertical-axis
measurement between marker cursors.
Syntax
:CURSor[:TY]:MARKer:M<x>:DV<y>?
<x> = 1 to 4
<y> = 1 to 4
:CURSor[:TY]:MARKer:M<x>:DV<x>:STATe
Function Sets or queries the on/off status of the vertical
value measured between marker cursors.
Syntax
:CURSor[:TY]:MARKer:M<x>:DV<y>:STA
Te {<Boolean>}
:CURSor[:TY]:MARKer:M<x>:DV<y>:STA
Te?
<x> = 1 to 4
<y> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:DV1:STATE ON
:CURSOR:TY:MARKER:M1:DV1:STATE?
-> :CURSOR:TY:MARKER:M1:DV1:STATE 1
5.10 CURSor Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English