YOKOGAWA DLM4038 - Page 266

5-233
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:UART:SEARch:EXECute
Function Executes a UART signal search.
Syntax
:SERialbus<x>:UART:SEARch:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:EXECUTE
:SERialbus<x>:UART:SEARch:SELect
Function Sets which detected point to display in the UART
signal search zoom window and queries the
zoom position of the detected point.
Syntax
:SERialbus<x>:UART:SEARch:SELe
ct {<NRf>|MAXimum}
:SERialbus<x>:UART:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:UART:SEARCH:SELECT 1
:SERIALBUS1:UART:SEARCH:SELECT?
-> :SERIALBUS1:UART:SEARCH:SELECT 1.
50000000
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:UART:SEARch:SELect?
MAXimum
Function Queries the number of detected points in the
UART signal search.
Syntax
:SERialbus<x>:UART:SEARch:SELe
ct? {MAXimum}
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SELECT? MAXI
MUM
-> :SERIALBUS1:UART:SEARCH:SELECT 10
0
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:UART:SEARch:SETup?
Function Queries all UART signal search condition
settings.
Syntax
:SERialbus<x>:UART:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:UART:SEARch:SETup:DA
TA?
Function Queries all UART signal search data settings.
Syntax
:SERialbus<x>:UART:SEARch:SETup:DA
TA?
<x> = 1 to 4
:SERialbus<x>:UART:SEARch:SETup:DATA
:ASCii
Function Sets the UART bus signal search data in ASCII
format.
Syntax
:SERialbus<x>:UART:SEARch:SETup:
DATA:ASCii {<String>}
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SETUP:DATA:
ASCII "TEST"
:SERialbus<x>:UART:SEARch:SETup:DATA
:CONDition
Function Sets or queries the data comparison condition
(true or false) for UART signal searching.
Syntax
:SERialbus<x>:UART:SEARch:SETup:
DATA:CONDition {DONTcare|TRUE}
:SERialbus<x>:UART:SEARch:SETup:
DATA:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SETUP:DATA:C
ONDITION DONTCARE
:SERIALBUS1:UART:SEARCH:SETUP:DATA:C
ONDITION?
-> :SERIALBUS1:UART:SEARCH:SETUP:DAT
A:CONDITION DONTCARE
:SERialbus<x>:UART:SEARch:SETup:DATA
:CSENsitive
Function Sets or queries whether to distinguish uppercase
and lowercase letters in ASCII data for the UART
bus signal search.
Syntax
:SERialbus<x>:UART:SEARch:SETup:
DATA:CSENsitive {<Boolean>}
:SERialbus<x>:UART:SEARch:SETup:
DATA:CSENsitive?
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SETUP:DATA:C
SENSITIVE ON
:SERIALBUS1:UART:SEARCH:SETUP:DATA:C
SENSITIVE?
-> :SERIALBUS1:UART:SEARCH:SETUP:DAT
A:CSENSITIVE 1
5.25 SERialbus Group