YOKOGAWA DLM4038 - Page 46

5-13
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
Command Function Page
HCOPy Group
:HCOPy?
Queries all screen capture data output settings. 5-114
:HCOPy:ABORt
Stops data output and paper feeding. 5-114
:HCOPy:COMMent
Sets or queries the comment at the lower right of the screen. 5-114
:HCOPy:DIRection
Sets or queries the data output destination. 5-114
:HCOPy:EXECute
Executes data output. 5-114
:HCOPy:MULTitarget?
Queries all multi target feature settings. 5-114
:HCOPy:MULTitarget:PRINter
Sets or queries whether the multi target feature will send output to the built-in
printer.
5-114
:HCOPy:MULTitarget:NETPrinter
Sets or queries whether the multi target feature will send output to a network
printer.
5-114
:HCOPy:MULTitarget:FILE
Sets or queries whether the multi target feature will send output to a file. 5-114
:HCOPy:MULTitarget:WAVeform
Sets or queries whether the multi target feature will send output to a
waveform file.
5-114
:HCOPy:NETPrint?
Queries all network printer output settings. 5-114
:HCOPy:NETPrint:MODE
Sets or queries whether the DLM4000 will print to the network printer in
normal copy or hard copy mode.
5-114
:HCOPy:NETPrint:TONE
Sets or queries the network printer output color setting. 5-114
:HCOPy:NETPrint:TYPE
Sets or queries the network printer output command type. 5-115
:HCOPy:PRINter?
Queries all built-in printer output settings. 5-115
:HCOPy:PRINter:MAG
Sets or queries the magnification used when the DLM4000 prints to the built-
in printer in long copy mode.
5-115
:HCOPy:PRINter:MODE
Sets or queries whether the DLM4000 will print to the built-in printer in short,
long, or hard copy mode.
5-115
:HCOPy:PRINter:RANGe
Sets or queries the source window used when the DLM4000 prints to the
built-in printer in long copy mode.
5-115
:HCOPy:PRINter:REPort
Sets or queries whether the DLM4000 will print additional information on the
built-in printer.
5-115
:HCOPy:PRINter:TRANge
Sets or queries the output range used when the DLM4000 prints to the built-
in printer in long copy mode.
5-115
HISTory Group
:HISTory?
Queries all of the settings for the history feature. 5-116
:HISTory:AVERage
Sets or queries the highlight display mode for history waveforms. 5-116
:HISTory:DISPlay
Sets or queries the display record start and end numbers. 5-116
:HISTory:DMODe
Sets or queries the history waveform display mode. 5-116
:HISTory:RECord
Sets or queries the history waveform source record. 5-116
:HISTory:RECord? MINimum
Queries the minimum history waveform record number. 5-116
:HISTory:REPLay?
Queries all of the settings for the history waveform replay feature. 5-116
:HISTory:REPLay:JUMP
Jumps to the specified record number in a history waveform. 5-116
:HISTory:REPLay:SPEed
Sets or queries the history waveform replay speed. 5-116
:HISTory:REPLay:STARt
Starts replaying a history waveform in the specified direction. 5-116
:HISTory:REPLay:STOP
Stops history waveform replaying. 5-116
:HISTory:SEARch?
Queries all history waveform search settings. 5-116
:HISTory[:SEARch]:ABORt
Aborts searching. 5-116
:HISTory[:SEARch]:EXECute
Executes searching. This is an overlap command. 5-116
:HISTory[:SEARch]:LOGic
Sets or queries the history waveform search logic. 5-117
:HISTory[:SEARch]:NUMBer<x>?
Queries all of the settings for a search condition. 5-117
:HISTory[:SEARch]:NUMBer<x>:CON
Dition
Sets or queries the search criterion of a search condition. 5-117
:HISTory[:SEARch]:NUMBer<x>:MO
DE
Sets or queries the search mode of a search condition. 5-117
:HISTory[:SEARch]:NUMBer<x>:PAR
ameter?
Queries all parameter search settings. 5-117
:HISTory[:SEARch]:NUMBer<x>:PAR
ameter:ITEM
Sets or queries the specified waveform parameter's item for parameter
searching.
5-117
:HISTory[:SEARch]:NUMBer<x>:PAR
ameter:LIMit
Sets or queries the specified waveform parameter's upper and lower limits
for parameter searching.
5-117
:HISTory[:SEARch]:NUMBer<x>:PAR
ameter:TRACe
Sets or queries the specified waveform parameter's source waveform for
parameter searching.
5-118
5.1 List of Commands