1. Overview
35
TI 11B08A01-01E
(580) 400300
590
1100
(1280)
20
102 102580
375560560
30 674 (80)
A
5050
30 560
50
455
1691
(1495)
430 20
(800)
(190) (580)
Liquid-sample
valve (LSV) *1
Liquid-sample
valve (LSV) *1
Large isothermal oven
Large isothermal oven
Holes for installation
6-ø10.5
Type 5 (Wall-mounting)
Weight: approx. 175 kg
Protection system A *1
*5
*4
*3
(430)
*3: Required clearance needed for wiring.
*4: It is recommended to mount at approx. 250 mm
above the floor for easy operation or
maintenance.
*5: The wall construction for mounting has to be
designed to withstand 4 times the analyzer’s
own weight.
Air outlet for stream switching valve
6 mm or 1/4” tube
Protective gas (instrumental air) inlet
Rc1/4 or 1/4NPT
Protective gas (instrumental air for FPD2) inlet
Rc1/4 or 1/4NPT
Operation panel *1
Grounding wiring
(100 Ω or less)
Connection to electronics section *2
Wiring connection *2
Vent for protective gas (instrumental air)
Inlet/outlet for sample gas, carrier gases, etc.
6 mm or 1/4” tube
Unit: mm
Pressure gauge *1
Control unit
*1: It depends on specifications.
*2: Wiring connections are shown in
right figures.
View A
Vent header *1
(connection
Rc1/2 or
1/2NPT)
<Maintenance space>
28283529
For FM-X, CSA-X (wiring connection: 3/4NPT)
For FM-Y, CSA-Y (wiring connection: 3/4NPT)
For ATEX, IECEx, NEPSI (wiring connection: M25x1.5)
Connection 3/4NPT
Connection 3/4NPT
Connection M25x1.5
For ATEX, IECEx, NEPSI (wiring connection: 3/4NPT)
Connection 3/4NPT
Connector
(as accessories)
28
Protection system B *1
Sep. 07, 2017-00
To Next Page
Loading...
Need help?
General
