Printer Configuration and Adjustment
Adjust Printer Settings—Network Settings
100
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
WIRED GATEWAY
WLAN GATEWAY
Gateway
View and, if necessary, change the default gateway.
To save changes to this setting, set IP Protocol on page 101 to
PERMANENT, and then
reset the print server (see Reset Network on page 103).
User menu item:
Main Menu >
NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.gateway
Wireless: wlan.ip.gateway
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Table 6 • Network Settings (Continued)
To Next Page
Loading...