99
Printer Configuration and Adjustment
Adjust Printer Settings—Network Settings
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
WIRED SUBNET MASK
WLAN SUBNET MASK
Subnet Mask
View and, if necessary, change the subnet mask.
To save changes to this setting, set IP Protocol on page 101 to
PERMANENT, and then
reset the print server (see Reset Network on page 103).
User menu item:
Main Menu >
NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.netmask
Wireless: wlan.ip.netmask
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Table 6 • Network Settings (Continued)
To Next Page
Loading...