Zebra Silverline ZT410 - Page 98

Printer Configuration and Adjustment
Adjust Printer Settings—Network Settings
98
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
IP ALTERNATE PORT
Alternate TCP/IP
Port
View the alternate Ethernet TCP port number, over which labels and commands can be
sent for processing.
User menu item: *
* This menu item cannot be
modified from the control
panel.
Main Menu > NETWORK
WIRED IP ADDRESS
WLAN IP ADDRESS
IP Address
View and, if necessary, change the printer’s IP address.
To save changes to this setting, set IP Protocol on page 101 to
PERMANENT, and then
reset the print server (see Reset Network on page 103).
User menu item:
Main Menu >
NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.addr
Wireless: ip.addr, wlan.ip.addr
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Table 6 • Network Settings (Continued)