Printer Configuration and Adjustment
Adjust Printer Settings—Print Settings
78
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
MEDIA TYPE
Media Type Select the type of media that you are using.
User menu item:
Main Menu >
SETTINGS
Accepted values:
• CONTINUOUS
• GAP/NOTCH
• MARK
If you select
CONTINUOUS, you must include a label
length in your label format (
^LL if you are using ZPL).
If you select
GAP/NOTCH or MARK for various
noncontinuous media, the printer feeds media to
calculate the label length.
See Media Overview on page 20 for more information
about types of media.
Related ZPL command(s):
^MN
SGD command used:
ezpl.media_type
Printer web page: View and Modify Printer Settings > Media Setup >
Media Type
PRINT METHOD
Print Method Specify if the printer needs to use ribbon for printing.
User menu item:
Main Menu >
SETTINGS
Accepted values:
• THERMAL TRANS—uses ribbon and thermal transfer
media
• DIRECT THERMAL—uses direct thermal media and
no ribbon
Related ZPL command(s):
^MT
SGD command used:
ezpl.print_method
Printer web page: View and Modify Printer Settings > Media Setup > Print
Method
Table 4 • Print Settings (Continued)
To Next Page
Loading...