Zebra Silverline ZT410 - Page 94

Printer Configuration and Adjustment
Adjust Printer Settings—Tool Settings
94
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
STOP ZBI PROGRAM
Stop a ZBI
Program
If your printer is running a ZBI program, you may stop that program.
User menu item: *
* This menu item appears only
if ZBI is enabled on your
printer and no ZBI program is
running.
Main Menu > TOOLS
If ZBI programs are running, the printer lists them.
If you wish to stop a program:
1. Use the UP ARROW or DOWN ARROW to select
the file from this menu.
2. Press RIGHT SELECT to select STOP.
Related ZPL command(s):
~JQ
SGD command used:
zbi.control.terminate
Printer web page: Directory Listing
PRINT USB FILE
Print from a USB
Flash Drive
Select files to print from a USB Flash drive.
User menu item: *
* This menu item appears only
if a USB Flash drive is
inserted into the USB host
port on the printer.
Main Menu > TOOLS
1. Insert a USB flash drive into the printer’s USB host
port.
The printer lists available files. SELECT ALL is
available to print all available files on the USB Flash
drive.
2. Use the UP ARROW or DOWN ARROW to select a
file from this menu.
3. Press RIGHT SELECT to select PRINT.
SGD command used:
usb.host.read_list
Table 5 • Tools (Continued)