Zebra Silverline ZT410 - Page 93

93
Printer Configuration and Adjustment
Adjust Printer Settings—Tool Settings
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
ZBI ENABLED?
Enable ZBI Zebra Basic Interpreter (ZBI 2.0™) is a programming option that may be purchased for
your printer. If you would like to purchase this option, contact your Zebra reseller for
more information.
User menu item:
Main Menu >
TOOLS
SGD command used:
zbi.key (identifies if the ZBI 2.0 option is enabled or
disabled on the printer)
RUN ZBI PROGRAM
Run a ZBI
Program
If you have ZBI installed, you may choose to run a ZBI program that you have
downloaded to your printer.
User menu item: *
* This menu item appears only
if ZBI is enabled on your
printer and no ZBI program is
running.
Main Menu > TOOLS
If ZBI programs exist on your printer, they are listed. If
no program exists,
NONE is listed.
If you wish to run a ZBI program that you have
downloaded to your printer:
1. Use the UP ARROW or DOWN ARROW to select a
file from this menu.
2. Press RIGHT SELECT to select RUN. If no program
exists, the
RUN option does not perform an action.
Related ZPL command(s):
^JI, ~JI
SGD command used:
zbi.control.run
Printer web page: Directory Listing
Table 5 • Tools (Continued)