Printer Configuration and Adjustment
Adjust Printer Settings—Tool Settings
92
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
DIAGNOSTIC MODE
Communication
Diagnostics Mode
Use this diagnostics tool to cause the printer to output the hexadecimal values for all
data received by the printer.
For more information, see Communication Diagnostics Test on page 163.
User menu item:
Main Menu >
TOOLS
Accepted values:
• DISABLED
• ENABLED
Related ZPL command(s):
~JD to enable, ~JE to disable
SGD command used:
device.diagnostic_print
Control panel key(s):
Hold
PAUSE + FEED for 2 seconds when the printer is
in the Ready state.
Table 5 • Tools (Continued)
To Next Page
Loading...