Zebra Z Series User Manual

Index
150
79695L-002 Rev. A Z Series
®
/RZ™ Series User Guide 6/6/08
connect printer to computer or network, 28
connect to power source, 31
contacts, 11
continuous media
described, 34
setting media type, 73
control panel
buttons described, 20
enter and use Setup mode, 64
exit Setup mode, 65
LCD error messages, 115
lights described, 21
location, 16
overview and illustration, 19
parameters, 69
control prefix setting, 87
counters, 78
customer service, 11
cutter
cleaning, 108
Cutter Jam message, 118
Cutter mode media path, 40
loading media for Cutter mode, 41
print mode use described, 38
selecting Cutter mode, 72
D
darkness setting, 69
data bits setting, 85
data cables, 28
data source
connections, 27
site selection, 26
date setting, 93
default password, 66
defragmenting message, 118
Delayed Cut mode
loading media, 41
media path, 40
print mode use described, 38
selecting, 72
delimiter character setting, 88
diagnostics, 131
RFID test, 96
direct thermal mode
media scratch test, 35
setting, 74
disable password protection, 66
display language
changing from unreadable language, 128
selection, 94
display RFID tag data, 99
disposal of printer parts, 102
download firmware, 22
dpi format conversion, 92
E
electronics cover, 16
Eltron Programming Language (EPL), 22
emulations, 22
enter Setup mode, 64
error messages, 115
Ethernet
characteristics of internal wired connection, 27
characteristics of wireless connection, 27
internal wired connection and configuration, 30
wired and wireless connector locations, 17
wireless connection and configuration, 30
exit Setup mode, 65
external view of printer, 16
F
factory defaults
reload parameters, 65
restore network settings, 65
fanfold media
described, 34
loading, 42
FCC compliance, 4
FCC radiation exposure limits, 4
FEED button
description, 20
FEED and PAUSE self test, 137
FEED self test, 134
firmware, 22
Flash memory, 82
font list, 78
format convert setting, 92
format list, 79
format memory card, 81
format prefix setting, 87
G
general specifications, 142

Zebra Z Series Specifications

General

Print Method	Thermal Transfer or Direct Thermal
Max Print Width	4.09 in./104 mm (depending on model)
Max Print Length	39 in./991 mm (with 203 dpi)
Connectivity	USB, Serial (depending on model)
Supported Media Types	Wristbands
Media Width	1.0 inch (25.4 mm)
Operating Temperature	40°F to 104°F (5°C to 40°C)
Storage Temperature	-40° F/-40° C to 140° F/60° C
Resolution	203 dpi or 300 dpi (depending on model)