•
HDMI Output (loop-out)
•
USB Host Type-B interface
•
1Gb Ethernet port (RJ45 with PoE)
Interfaces on Wallplate Encoders: Rev 1WE
•
Power Input (12VDC)
•
RS232 Input/Output (3.5mm jack)
•
HDMI Input
•
USB-C Video Input
•
USB Host Type-C interface
•
1Gb Ethernet port (RJ45 with PoE)
Decoder Function
The function of the ZyPerUHD60 Decoder device (Decoder) is to accept 1Gb Ethernet traffic
that represents the information to be decoded and displayed. When the appropriate IP stream
is received the Decoder unit will decompress it, reformat the video and audio information for
display and play it out its HDMI video output. Audio is also played out the appropriate port as
included.
Other ports on the Decoder devices are for the carriage of USB, IR, RS232 and audio data.
Interfaces on Dual LAN Standard Decoders: Rev 2D and Rev 2DA
•
Infrared Input/Output
•
HDMI Output
•
1Gb Ethernet (RJ45 with PoE)
•
1Gb Ethernet (RJ45) Dante or Utility
•
2 USB Type-A Interfaces
•
Analog Audio Output (Phoenix connector with supplied adapter)
•
RS232 Input/Output (Phoenix connector with supplied adapter)
•
Power Input (12VDC)
Interfaces on Single LAN Decoders: Rev 1D and Rev 1DA
•
Infrared Input/Output
•
HDMI Output
•
1Gb Ethernet (RJ45 with PoE)
•
2 USB Type-A Interfaces
•
Analog Audio Output (Phoenix connector with supplied adapter)
•
RS232 Input/Output (Phoenix connector with supplied adapter)
•
Power Input (12VDC)
To Next Page
Loading...