ZeeVee ZyPerUHD60 - Switch Requirements

ZyPerUHD60
Switch Requirements
When the ZyPerUHD60 series deliver video, transfer rates can vary between 400 Mbps and 900
Mbps, which requires a gigabit Ethernet switch. (Date rates and compression depend on the
resolution, color space and refresh rate of the input video stream.)
Switches must support the following features:
•
Multicast forwarding or filtering
•
IGMP Snooping
•
IGMP snooping fast leave
•
Jumbo frame(9000 bytes or larger)
Configure switches features based on the table below:#
Note: Different brands of models of switches may have different names of the previous features.
Feature of Switch
Parameters
Green or energy-saving feature
Disable
Multicast forwarding or filtering
Enable
IGMP Snooping
Enable
IP address of IGMP Querier
Must be assigned a valid value
IGMP Querier
Disable
IGMP snooping fast leave
Enable
Validate IGMP IP Header
Disable
Dynamic multicast router port
Disable
Jumbo Frame or (Frame Size)
Enable or set to 9000 bytes or larger
Rev: 20231115
Page of 53 77
User Manual