AC Power Cord
Connect the external AC/DC supply unit to the AC mains with a UL-listed detachable power
cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 250 V min., plug 5-15P configuration for
120V application, or 6-15P for 240V application.
AC/DC converter inlet side of AC cord shall be of type IEC320C13
•
Do not overload wall outlets and extension cords.#
Power cords should be routed so that they are not likely to be walked upon or
pinched by items placed upon or compressing them.#
Match the rating of the power cord to the voltage of the power outlet in
accordance with the specific requirements and in compliance with safety standard of your
particular country.
To Next Page
Loading...