ZyPerUHD60 Features
•
Distributes and switches 4K UHD AV signals via standard gigabit Ethernet networks
•
Supports HDMI input and output resolutions up to 3840 x 2160@60Hz 4:4:4
•
Supports USB-C Video input with resolutions up to 3840 x 2160@60Hz 4:4:4
•
Supports streaming resolutions up to 3840 x 2160@60Hz 4:4:4
•
Supports 7.1 channel audio
•
Integrated Dante Embedded option with dedicated LAN port
•
Supports independent analog audio input and output at 2 channels, 24 bits @48 kHz/channel
•
HDCP 2.3 compliant
•
Support Video walls up to 15 x 15 with bezel compensation
•
Flexible routing policies, allowing audio, video together with IR, and USB signals to be routed
separately or as a whole throughout the matrix system
•
Capable of outputting IP streams that can easily be decoded and viewed on multiple decoders
•
Allows AV, USB, IR, RS232 and power signals to be delivered up to 328 ft (100 m) over a
single Cat 6 cable or above. (Cat 6a and above recommended)
•
~1 fps latency
•
Supports independent balanced analog audio input and output at 2 channels, 24 bits@48 kHz/
channel
•
Supports bi-directional serial, allowing control of remote RS232 devices from both sides of
encoders and IP controller
•
Supports bi-directional IR, allowing control of remote source and display devices from both
sides of encoders and decoders
•
Encoder offers a USB-Host port directly connect to a PC and complies with USB 2.0 standard
•
Decoder offers two USB type A ports to directly connect to a keyboard and a mouse and
complies with USB 2.0 standard, providing +5 VDC at up to 500 mA to connected USB
peripherals.
•
Offers point-to-point, point-to-multipoint, multipoint-to-point, multipoint-to-multipoint
applications
•
Supports PoE to be remotely powered by compatible power source equipment such as a PoE-
enabled Ethernet switch, eliminating the need for a nearby power outlet
To Next Page