Most of the options are self explanatory for setting a resolution such as Full HD (1920 x 1080) or
Ultra HD (3840 x 2160). There is however an option to provide a custom or non-standard
resolution. Below is a chart of example options for the Customize field.
Important Note: The settings above are only valid when a ZyPer Management Platform is NOT
connected to the system. The ZMP will automatically override any of the settings above with
whatever setting is programmed to the ZMP. Contact ZeeVee support if other custom settings
are needed.
USB over IP
This section allows you to make modifications to the USB functionality. Recommended in most
cases to leave at defaults.
To Next Page
Loading...