Dante Related Console Commands
The ZyPerUHD60 encoder and decoder units that support Dante can be configured as either a
Dante Transmitter or Receiver device. There are various console commands to change this
functionality. Note that some commands require a Reboot of the endpoint to be implemented.
Console commands are entered in the System/Utilities tab:
Decoder Dante Commands
1. Set Decoder for Dante Receive function
a. astparam s a_bridge_en n
b. astparam save
c. "Reboot via the Reboot command button
2. Set Decoder for Dante Transmit function
a. astparam s a_bridge_en y
b. astparam save
To Next Page
Loading...