Important Note
#
Dante AV-A can be implemented on both single and dual LAN ZyPerUHD60 units. In a single
LAN configuration, the Dante function and standard UHD60 AV function share the same LAN.
Dante will share the same IP address as the ZyPerUHD60 unit itself. This IP address cannot be
changed in Dante Controller.
For a Dual LAN configuration, Dante AV-A requires its own IP Address that is different and
independent from the IP Address of the ZyPerUHD60 itself. This could include the Dante AV-A
IP address being on a different subnet. Customers that are using a DHCP server to generate IP
Addresses must ensure the pool of available IP Addresses accounts for any ZyPerUHD60
endpoints with Dante Embedded in the system.
If no DHCP server is available, Dante AV-A will assign itself a Link-Local address. However, if
there is a DCHP server, but there are not enough addresses available in the pool, Dante
connections may fail.
c9."#$%&.?6:39.4+7;9,F..
;,$%<&P?4497.+=7,?87.>,9D.
+489:+,.?4?@9A.?6:39.59,72