Axiotech and Axiotech
vario
Carl Zeiss
B 40-020 e 06/99 2-17
☞
The reflector sliders HD (2-21/1) and HD DIC (2-21/2) can only be pulled out if one of the dust
covers (2-21/5) on the left or right stand side has been removed. For this purpose, unscrew the
two hexagonal screws (2-21/6) on one side using the SW 3 ball-headed screwdriver, remove
the dust cover and pull out the reflector slider very carefully because a darkfield component
projects from the reflector slider!
To Next Page
Loading...
