Zeiss Axiotech - Operation and Function Controls of the Axiotech 30; Operation and Function Controls of the Axiotech 100

Carl Zeiss Axiotech and Axiotech
vario
3-4 B 40-020 e 06/99
3.1.2 Operation and function controls of the Axiotech 100
Fig. 3-2 Operation and function controls of the Axiotech 100
1 Eyepieces 11 Reflected-light illuminance control
2 Binocular phototube 20° 12 On/Off switch with pilot lamp
3 Pushrod (to change the beam path) 13 Coaxial coarse and fine drive
4 Luminous-field diaphragm slider with 14 Mechanical stage with specimen holder
centering screws and knurled wheel for reflected light 15 Coaxial stage drive
5 Compartment for 3D illumination shutter 16 Compartment for reflector slider
6 Pushrod for reflected-light aperture diaphragm 17 Objective nosepiece
7 Centering screws for reflected-light aperture diaphragm 18 Transmitted-light illumination equipment
8 Reflected-light illumination equipment (HAL 100) 19 Transmitted-light luminous-field diaphragm
9 Reflected-light filter slider 20 Condenser carrier with condenser
10 Lamp voltage display 21 Compartment for DIC slider