ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Correct face registration and authentication method
 Recommendation for registering a face
 Maintain a gap of 40cm to 80cm between the device and the face while registering it.
 Be careful not to change your facial expression. (Smiling face, drawn face, wink, etc.)
 If you do not follow the instructions on the screen, the face registration may take longer or may
fail.
 Be careful not to cover the eyes or eyebrows.
 Do not wear hats, masks, sunglasses, or eyeglasses.
 Ensure that the screen does not have two faces. You can only register one person at a time.
 It is recommended for a user wearing glasses to register both faces with and without glasses.
 Recommendation for authenticating a face
 Ensure that the face appears inside the guideline displayed on the screen of the device.
 Authentication may fail if the glasses have been modified. Authenticate the face without glasses
even more if it has already been registered. Authenticate the face with the previously worn
glasses if they face with glasses has been registered.
 If a part of the face is covered with a hat, a mask, an eye patch, or sunglasses, authentication may
fail. Do not cover the face, allow the device to recognize both the eyebrows and the face.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm