ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 72 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
11 Access Control
On the Main Menu, tap Access Control to set the schedule of the door opening, locks control and to
configure other parameters settings related to access control.
To gain access, the registered user must meet the following conditions:
 The relevant door’s current unlock time should be within any valid time zone of the user’s period.
 The corresponding user’s group must already be set in the door unlock combination (and if there
are other groups, being set in the same access combo, then the verification of those group’s
members is also required to unlock the door).
 In default settings, new users are allocated into the first group with the default group time zone,
where the access combo is "1" and is set in unlock state by default.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm