ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 21 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
If the verification fails, it prompts "Please adjust your position! ".
3.6.3 Multi-face Verification
 1: N Multi-face Verification
1. conventional verification
In this verification mode, the device compares the obtained multi-person facial images with all the face
data stored in it. At the same time, the device can verify up to four people. The number of verification
results displayed on the right side, can be customized. The image below depicts the pop-up prompt for a
successful comparison result.
Tap System > Face > Face Identifying Settings > Identifying Mode > Multi-face Identifying > Count
to Display to set the number of the verification results to be displayed.
Note: The Count to Display can be set between 1 to 4.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm