ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 52 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
 Tap Daylight Saving Time to enable or disable the function. If enabled, tap Daylight Saving
Mode to select a daylight-saving mode and then tap Daylight Saving Setup to set the switch
time.
Week Mode Date Mode
 When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be
restored, but the device date and time cannot be restored.
Note: For example, if a user sets the time of the device (18:35 on March 15, 2020) to 18:30 on January 1,
2021. After restoring the factory settings, the time of the device will remain at 18:30 on January 1, 2021.
Access Logs Setting 8.2
Tap Access Logs Setting on the System interface.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm