ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 28 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
3.6.6 Combined Verification
This device allows you to use a variety of verification methods to increase security. There are a total of 9
distinct verification combinations that can be implemented, as listed below:
Combined Verification Symbol Definition
Symbol Definition Explanation
/
or
This method compares the entered verification of a person with the related
verification template previously stored to that Personnel ID in the Device.
+
and
This method compar
es the entered verification of a person with all the
verification templates previously stored to that Personnel ID in the Device.
Procedure to set for Combined Verification Mode
 Combined verification requires personnel to register all the different verification methods.
Otherwise, employees will not be able to successfully verify the combined verification process.
 For instance, when an employee has registered only for the face data, but the Device verification
mode is set as “Face + Password”, the employee will not be able to complete the verification
process successfully.
 This is because the Device compares the face template of the person with the registered
verification template (both the Face and the Password) previously stored to that Personnel ID in
the Device.
 But as the employee has registered only the Face but not the Password, the verification will not
get completed and the Device displays “Verification Failed”.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm