ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 33 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
 Enroll Card QR Code
Tap Card in the New User interface to enter the card registration page.
 On the Card interface, show the QR code in front of the camera. The QR code registration will be
successful.
 If the QR code is registered already then the “Error! Card already enrolled.” message shows up.
The registration interface is as follows:
5.1.5 Password
Tap Password in the New User interface to enter the password registration page.
 On the Password interface, enter the required password and re-enter to confirm it and tap OK.
 If the re-entered password is different from the initially entered password, then the device
prompts the message as "Password does not match!", where the user needs to re-confirm the
password again.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm