ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 91 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Appendix 1
Requirements of Live Collection and Registration of Visible Light Face
Images
1) It is recommended to perform registration in an indoor environment with an appropriate light
source without underexposure or overexposure on the face.
2) Do not place the device towards outdoor light sources like door or windows or other harsh light
sources.
3) Dark-color apparels other than the background color are recommended for registration.
4) Expose your face and forehead properly and do not cover your face and eyebrows with your hair.
5) It is recommended to show a normal facial expression. (A smile is acceptable, but do not close your
eyes, or incline your head to any orientation).
6) Two images are required for a person with eyeglasses, one image with eyeglasses and the other
without them.
7) Do not wear accessories like a scarf or mask that may cover your mouth or chin.
8) Please face right towards the capturing device and locate your face in the image capturing area as
shown in the image below.
9) Do not add more than one face in the capturing area.
10) A distance of 50cm to 80cm is recommended for capturing the image. (The distance is adjustable,
subject to body height).
Image1:Face Capture Area

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm