ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 61 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name Description
Device Temperature
This column shows the real-time temperature of the device.
Min. Temp. to Self-
Heating
Once the device temperature is lower than the set value, the device will
start self-heating, the range is 0 to 10(°C).
Max. Temp to
Shutdown
When the device temperature is lower than the set value, it will shut down
automatically to protect the hardware, the range is 70 to 90 (°C).
Detection Management 8.6
Tap Detection Management on the System interface to configure the Detection Management settings.
Function Description
Function Name Description
Enable Mask
Detection
It enables or disables the mask detection function.
When enabled, the device identifies whether the user is wearing a mask or not
during verification.
Deny Access
Without Mask
It enables or disables the access of a person without mask.
When enabled, the device denies access of a person, if not wearing a mask.
Allow Unregistered
People to Access
It enables or disables the access of unregistered person.
When enabled, the device allows the person to enter without registration.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm