ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 51 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
8 System Settings
It helps to set related system parameters to optimize the accessibility of the device.
Tap System on the Main Menu interface to get into its menu options.
Date and Time 8.1
Tap Date Time on the System interface to set the date and time.
 Tap Date and Time Auto Sync to enable automatic time synchronization based on the service
address you enter.
 Tap Manual Date and Time to manually set the date and time and then tap to Confirm and
save.
 Tap Select Time Zone to manually select the time zone where the device is located.
 Enable or disable this format by tapping 24-Hour Time. If enabled, then select the Date Format
to set the date.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm