EasyManuals Logo

ZKTeco ProFace X User Manual

ZKTeco ProFace X
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
ProFace X (DS) User Manual
Page | 65 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Idle Time To Slide
Show (s)
When there is no operation, and the time exceeds the set value, a slide show is
displayed. The function can be disabled, or you may set the value between 3
and 999 seconds.
Slide Show Interval
(s)
It is the time interval in switching between different slide show pictures. The
function can be disabled, or you may set the inter
val between 3 and 999
seconds.
Idle Time to Sleep
(m)
If the sleep mode is activated, and when there is no operation in the device,
then the device will enter standby mode.
This function can be disabled or set a value within 1-999 minutes.
Main Screen Style
The style of the main screen can be selected according to the user preference.
Company Name
Enter the company name here.
The company name is printed when the
company name option in the print information setting is enabled.
Voice Settings 9.2
Tap Voice on the Personalize interface to configure the voice settings.
Function Description
Function Name Description
Voice Prompt
Toggle to enable or disable the voice prompts during function operations.
Touch Prompt
Toggle to enable or disable the keypad sounds.
Volume
Adjust the volume of the device which can be set between 0-100.
Bell Schedules 9.3
Tap Bell Schedules on the Personalize interface to configure the Bell settings.

Table of Contents

Other manuals for ZKTeco ProFace X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZKTeco ProFace X and is the answer not in the manual?

ZKTeco ProFace X Specifications

General IconGeneral
TypeFace recognition terminal
IK codeIK04
Face capacity30000
Product colorBlack, Grey
User capacity50000 user(s)
Event capacity1000000
Wiegand interfaceYes
Temperature measurement range34 - 45 °C
Temperature measurement accuracy0.3 °C
Temperature measurement distance30 - 50 cm
International Protection (IP) codeIP68
Operating temperature (T-T)-30 - 60 °C
RS-232 ports1
Screen shapeFlat
Display diagonal8 \
Display technologyLED
Sensor typeCMOS
Camera resolution (numeric)2 MP
Input current2 A
Input voltage12 V
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)26 mm
Width (with stand)143 mm
Height (with stand)227 mm

Related product manuals