ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 66 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
New Bell Schedule
Tap New Bell Schedule on the Bell Schedule interface to add a new bell schedule.
Function Description
Function Name Description
Bell Status
Toggle to enable or disable the bell status.
Bell Time
Once the required time is set, the device automatically triggers to ring the bell
during that time.
Repeat
Set the required number of counts to repeat the scheduled bell.
Ring Tone
Select a ringtone.
Internal Bell Delay(s)
Set the replay time of the internal bell. Valid values range from 1 to 999
seconds.
All Bell Schedules
Once the bell is scheduled, on the Bell Schedules interface, tap All Bell Schedules to view the newly
scheduled bell.
Edit the scheduled bell
On the All-Bell Schedules interface, tap on the required bell schedule, and tap Edit to edit the selected
bell schedule. The editing method is the same as the operations of adding a new bell schedule.
Delete a bell
On the All-Bell Schedules interface, tap the required bell schedule, tap Delete, and then tap Yes to delete
the selected bell.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm