ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 18 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Verification Mode 3.6
3.6.1 QR Code Verification
In this verification mode, the device compares the QR code image collected by the QR code collector to all
of the QR code data on the device.
On the ZKBioSecurity App, tap [Mobile Credential], and a QR code with employee ID and card number
(static QR code only includes card number) details will appear. To achieve contactless authentication, a QR
code can be used to replace a physical card on a specific device.
3.6.2 Facial Verification
 1: N Facial Verification
1. Conventional Verification
In this verification mode, the device compares the obtained facial images to all the device's face data. The
following is the pop-up prompt for a successful comparison result.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm