ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 90 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
The QR code can replace a physical card on a specific device to achieve contactless authentication to
open the door.
While using this function for the first time, the App will prompt to authorize the modification of screen
brightness settings, as shown in the figure:
The QR code is automatically refreshed for every 30s, and it also supports manual refresh.
Note: For other specific operations, please refer to ZKBioSecurity Mobile App User Manual.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm