ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 20 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
 1:1 Facial Verification
In this verification mode, the device compares the face captured by the camera to the facial template
associated with the entered user ID. Tap [OK] on the main interface after entering 1:1 facial verification
mode and entering the user ID.
If the user has registered a card and password in addition to their face, and the verification method is set
for Card/ Password/ Face verification, the following screen will appear. Select the icon to enter the face
verification mode.
After successful verification, the prompt box displays "Successfully verified", as shown below:

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm