ZKTeco ProFace X User Manual

ProFace X (DS) User Manual
Page | 23 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
 1:1 Multi-face Verification
In this verification mode, the device compares the face captured by the camera with the facial template
associated to the entered user ID. Press on the main interface and select the 1:1 facial verification
mode and enter the user ID and tap [OK].
If the user has registered card and password in addition to the face, and the verification method is set to
Card/ Password/ Face verification, the following screen will appear. Select the icon to enter the face
verification mode.

ZKTeco ProFace X Specifications

General

Type	Face recognition terminal
IK code	IK04
Face capacity	30000
Product color	Black, Grey
User capacity	50000 user(s)
Event capacity	1000000
Wiegand interface	Yes
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
International Protection (IP) code	IP68
Operating temperature (T-T)	-30 - 60 °C
RS-232 ports	1
Screen shape	Flat
Display diagonal	8 \
Display technology	LED
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Input current	2 A
Input voltage	12 V

Weight and Dimensions

Depth (with stand)	26 mm
Width (with stand)	143 mm
Height (with stand)	227 mm