5. Use to set how timecode is initialized, and press .
Setting Explanation
Restart Time When the F8n Pro starts, the value set by “Restart” is used to jam the
internal timecode. (→Restarting internal timecode with a specified
value)
RTC When the F8n Pro starts, its timecode is restored from the timecode
when the power was turned off and advanced by the elapsed time
using the “Date/Time (RTC)” setting (→Setting the date and time
(Date/Time (RTC))).
Since RTC is less precise than internal timecode, discrepancies will
occur.
154
To Next Page
Loading...
