Zoom H5studio - Page 111

Enabling the loopback function
This function allows playback sound from a computer, smartphone or tablet and sounds input to the
H5studio to be mixed and sent again (looped back) to the computer, smartphone or tablet.
This function can be used to add narration to music played back from a computer and to record the mix or
stream it on that computer, for example.
1. On the Home Screen when in audio interface mode, use the (selection) dial to select
(Output) and press the (ENTER) button.
This opens the Output Settings Screen.
2. Use the (selection) dial to select “Loop Back” and press the (ENTER) button.
3. Use the (selection) dial to select “On” or “Off” and press the (ENTER) button.
Selecting "On” turns on the loopback function.
111