Restoring the factory default state
The H5studio can be restored to its factory default state.
1. On the Home Screen, use the (selection) dial to select (SYSTEM) and press the
(ENTER) button.
This opens the System Settings Screen.
2. Use the (selection) dial to select “Reset All Settings” and press the (ENTER) button.
3. Use the (selection) dial to select “Execute” and press the (ENTER) button.
This will restore the H5studio to its factory default state and turn the power off.
NOTE
Initializing settings will overwrite all settings with their factory defaults. Be certain before using this function.
145
To Next Page
Loading...
