Setting the sample rate
The sample rate used to record files can be set.
1. On the Home Screen, use the (selection) dial to select (REC) and press the
(ENTER) button.
This opens the Rec Settings Screen.
2. Use the (selection) dial to select “Sample Rate” and press the (ENTER) button to
confirm.
3. Use the (selection) dial to select the sample rate and press the (ENTER) button to
confirm.
The following sample rates can be selected.
44.1 kHz, 48 kHz, 96 kHz, 192 kHz
72
To Next Page
Loading...
