Using plug-in power
Make the following setting when a mic that is compatible with plug-in power is connected to the MIC/LINE
IN jack.
1. On the Home Screen, use the (selection) dial to select (INPUT) and press the
(ENTER) button.
This opens the Input Settings Screen.
2. Use the (selection) dial to select (MIC) and press the (ENTER) button.
3. Use the (selection) dial to select “Plugin Power” and press the (ENTER) button.
4. Use the (selection) dial to select “On” and press the (ENTER) button.
NOTE
This setting can be set only when a mic capsule that can provide plug-in power is connected.
51
To Next Page
Loading...
