Using timecode
Timecode overview
SMPTE timecode can be input to the H5studio by using an UltraSync BLUE made by ATOMOS/Timecode
Systems.
Timecode is time information written to data when recording video and audio. It is used for video editing,
control of other devices, and synchronization of audio and video, for example.
NOTE
• An ATOMOS/Timecode Systems UltraSync BLUE cannot be used during audio interface operation
(→Using as an audio interface).
• An H5studio cannot have both ZOOM Handy Control & Sync and an UltraSync BLUE connected at the
same time.
Using timecode for editing
If video and audio data both have recorded timecode, aligning them to a timeline and synchronizing them
together is easy when using nonlinear editing software for editing.
❶
Video file with timecode recorded
❷
Audio file with timecode recorded
❸
Nonlinear editing software
123
To Next Page
Loading...
