Zoom H5studio - Reducing Noise When Using an SSH-6 E (Low Cut)

Reducing noise when using an SSH-6e (Low Cut)
Low frequencies can be cut to reduce the sound of wind and vocal pop noises, for example.
1. On the Home Screen, use the (selection) dial to select (INPUT) and press the
(ENTER) button.
This opens the Input Settings Screen.
2. Use the (selection) dial to select (MIC) and press the (ENTER) button.
3. Use the (selection) dial to select “Low Cut” and press the (ENTER) button.
4. Use the (selection) dial to select the cut frequency and press the (ENTER) button.
Lo Cut can be set to OFF, 80 Hz, 160 Hz or 240 Hz.
155